Pneumatic Operated Machine for Removal of Tyre
Shubham K.Ambekar, Rajesh H.Dandekar, Gaurao B.Dhandare, Swapnil N.Jediwar, Sahil G.Kudegave, Azizullah S. Khan, Prof. P. H. Jaiswal
Volume 2: Issue 1, March 2015, pp 44-46
1Department of Mechanical Engineering, BCYRC’S Umrer College Of Engineering, Umrer, India.
Rajesh H.Dandekar, Gaurao B.Dhandare, Swapnil N.Jediwar, Sahil G.Kudegave, Azizullah S. Khan, Prof. P. H. Jaiswal
2Department of Mechanical Engineering, BCYRC’S Umrer College Of Engineering, Umrer, India.
Abstract:-This project is based on manufacturing of conceptual model of tyre removal from rim of vehicle without human effort. It is very difficult to remove tyre manually and it required lots of time and effort. Purpose of our project is to reduce that time, human effort and making model in such a way that it can easily purchase in cheapest cost by buyer. The mechanism of machine is simple where the tyre will rotate in a minimum speed of about 20 rpm using worm gear drive and a tyre can be removed from the rim with help of pneumatic arrangement on a long tool which can be inserted into a tyre. An analytical and finite element analysis of machine is discussed in paper.
Index Terms:-Speed reduction, gear box, motor, cylinder, tool, FEA.
REFERENCES Rernocorghi, “Wheel Rim Locking Device For Tyre Removal Machines”, Correggio (IT), Prior Publication Data US 2001/0042601 A1,vol.1, march 2003.
 Maurizio Bonacini, “Machine for Fitting and Removing Tyres and Wheel Rims For Vehicles”, Correggio (IT), Prior Publication Data, US 2004/0221964 A1, pp. 25/128, may 2006.
 B.D. Shiwalkar, “Design Data Book For Machine Element” Denett & Company Publication, 3rd ed., pp. 39.
 R. S. Khurmi, “Machine Design”, S. Chand Publication Design Data Book, vol.1, pp.1101, Jan 2002.
To view full paper, Download here