Design and Fabrication of Manual Roller Bending Machine

Mhadye, Yash; Sharma, Suraj; Pagi, Vikrant; Pandey, Akash

doi:10.26706/ijaefea.4.12.20251203

Abstract

This paper aims to develop a roller bending helpful machine to bend pipes and metal strips in the workshop. This project is to vogue and constructs a negotiable roller bending machine. This machine is utilized to bend steel pipes and meta strips into a curve and so the choice curvature shapes. The scale of the machine is very convenient for movable work. It is entirely created by steel. Moreover, it is easy to carry and use at anytime and anywhere. It reduces human effort and, in addition, required low less talent to figure this machine. We incline to face live arising with operated by hand roller bending machine using block, motors, gears, and support (frame). Power is that the machine for pipe bending, and everything works manually. Therefore, our objective is to extend preciseness at low costs while not moving the pipe bending's productivity. This machine works on the simple kinematic system instead of subtle vogue. Because of its mobility, it are usually utilized by workshop or fabrication search. A bending machine is also a standard tool in the workshop that is accustomed bend a metal.

Keywords

Roller bending machine Manual pipe bending Sheet metal forming Kinematic mechanism Workshop fabrication

References

V. P. Kalbande, P. V. Walke, K. Rambhad, M. Mohan, and A. Sharma, “Performance Enhancement of Thermal Energy Storage Systems Using Nanofluid,” in Energy Storage Systems. Engineering Optimization: Methods and Applications, V. K. Mathew, T. K. Hotta, H. M. Ali, and S. Sundaram, Eds. Singapore: Springer, 2023, pp. 61–75. doi: 10.1007/978-981-19-4502-1_6.
K. S. Rambhad, P. V. Walke, and P. C. Phadke, “Performance evaluation of forced convection desiccant bed solar dryer integrated with sensible heat storage material,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 5, no. 2, pp. 24–35, Jun. 2018.
P. H. Sahare, N. K. Ade, M. A. Kumbhalkar, K. S. Rambhad, S. D. Polshettiwar, S. A. Paul, T. N. Vaidya, and R. S. Janwe, “Manufacturing of foldable bicycle with finite element analysis of push-pull clamp,” AIP Conference Proceedings, vol. 2839, no. 1, p. 020035, Sep. 2023. doi: 10.1063/5.0167693.
N. Wargantiwar, K. S. Rambhad, and P. Ballamwar, “Hydraulic Systems and Hydraulic Leakages - A Review,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 4, no. 4, pp. 73–80, Dec. 2017.
K. H. Jatakar, G. V. Mulgund, A. D. Patange, B. B. Deshmukh, K. S. Rambhad, and V. P. Kalbande, “Two-wheeler tyre pressure monitoring through K-nearest neighbours algorithm trained using wheel hub vibrations acquired using ADXL335 accelerometer,” International Journal of Vehicle Noise and Vibration, vol. 18, no. 3/4, pp. 232–246, Jan. 2023. doi: 10.1504/IJVNV.2022.10053307.
K. S. Rambhad and P. V. Walke, “An Experimental investigation of solar assistedair heating for solid desiccantregeneration using parabolic trough solar concentrator,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 4, no. 3, pp. 45–47, Sep. 2017.
F. Sheikh, R. A. Jibhakate, H. Bisaria, and K. S. Rambhad, “Evaluation of tensile property of SiO2 dispersed SLA 3D printed epoxy composites,” Materials Today: Proceedings, May 2024. doi: 10.1016/j.matpr.2024.05.125.
P. V. Walke, K. S. Rambhad, and V. P. Kalbande, “Solid Desiccant Dehumidification and Regeneration Techniques,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 2, no. 1, pp. 1–5, Mar. 2015.
K. S. Rambhad, P. K. Adhapure, Sagar B. Lokare, R. B. Navale, and S. E. Zarekar, “Design of Glass Cleaning Robot for High Buildings,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 8, no. 1, pp. 21–26, Mar. 2021. doi: 10.26706/ijaefea.1.8.20210303.
K. S. Rambhad, P. Jondhale, R. Kambale, V. Jedhe, and K. Thakare, “CFD analysis of solid desiccant dehumidifier wheel,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 8, no. 1, pp. 12–20, Mar. 2021. doi: 10.26706/ijaefea.1.8.20210302.
K. S. Rambhad, J. Dane, V. Joshi, S. Kulkarni, and R. Ghodke, “Simulation and Optimization of Silica Gel and MolecularSieve Desiccant Wheel for Air Dehumidification,” Journal of Thermal Engineering and Technology, vol. 5, no. 1, pp. 11–27, May 2020. doi: 10.13140/RG.2.2.23423.23205.
B. K. Pradhan, D. Wangmo, J. Dendup, K. Yeshi, K. Drukpa, and T. Wangdi, “Design and fabrication of Portable manual Roller Bending machine,” JNEC Thruel Rig Sar Toed, vol. 6, no. 1, 2023.
A. Kale, S. Patil, R. Shinde, and P. Jadhav, “Design and manufacturing of automatic transmission system,” International Research Journal of Engineering and Technology (IRJET), vol. 7, no. 3, pp. 3657–3661, 2020.

[1] V. P. Kalbande, P. V. Walke, K. Rambhad, M. Mohan, and A. Sharma, “Performance Enhancement of Thermal Energy Storage Systems Using Nanofluid,” in Energy Storage Systems. Engineering Optimization: Methods and Applications, V. K. Mathew, T. K. Hotta, H. M. Ali, and S. Sundaram, Eds. Singapore: Springer, 2023, pp. 61–75. doi: 10.1007/978-981-19-4502-1_6.

[2] K. S. Rambhad, P. V. Walke, and P. C. Phadke, “Performance evaluation of forced convection desiccant bed solar dryer integrated with sensible heat storage material,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 5, no. 2, pp. 24–35, Jun. 2018.

[3] P. H. Sahare, N. K. Ade, M. A. Kumbhalkar, K. S. Rambhad, S. D. Polshettiwar, S. A. Paul, T. N. Vaidya, and R. S. Janwe, “Manufacturing of foldable bicycle with finite element analysis of push-pull clamp,” AIP Conference Proceedings, vol. 2839, no. 1, p. 020035, Sep. 2023. doi: 10.1063/5.0167693.

[4] N. Wargantiwar, K. S. Rambhad, and P. Ballamwar, “Hydraulic Systems and Hydraulic Leakages - A Review,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 4, no. 4, pp. 73–80, Dec. 2017.

[5] K. H. Jatakar, G. V. Mulgund, A. D. Patange, B. B. Deshmukh, K. S. Rambhad, and V. P. Kalbande, “Two-wheeler tyre pressure monitoring through K-nearest neighbours algorithm trained using wheel hub vibrations acquired using ADXL335 accelerometer,” International Journal of Vehicle Noise and Vibration, vol. 18, no. 3/4, pp. 232–246, Jan. 2023. doi: 10.1504/IJVNV.2022.10053307.

[6] K. S. Rambhad and P. V. Walke, “An Experimental investigation of solar assistedair heating for solid desiccantregeneration using parabolic trough solar concentrator,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 4, no. 3, pp. 45–47, Sep. 2017.

[7] F. Sheikh, R. A. Jibhakate, H. Bisaria, and K. S. Rambhad, “Evaluation of tensile property of SiO2 dispersed SLA 3D printed epoxy composites,” Materials Today: Proceedings, May 2024. doi: 10.1016/j.matpr.2024.05.125.

[8] P. V. Walke, K. S. Rambhad, and V. P. Kalbande, “Solid Desiccant Dehumidification and Regeneration Techniques,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 2, no. 1, pp. 1–5, Mar. 2015.

[9] K. S. Rambhad, P. K. Adhapure, Sagar B. Lokare, R. B. Navale, and S. E. Zarekar, “Design of Glass Cleaning Robot for High Buildings,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 8, no. 1, pp. 21–26, Mar. 2021. doi: 10.26706/ijaefea.1.8.20210303.

[10] K. S. Rambhad, P. Jondhale, R. Kambale, V. Jedhe, and K. Thakare, “CFD analysis of solid desiccant dehumidifier wheel,” International Journal of Analytical, Experimental and Finite Element Analysis (IJAEFEA), vol. 8, no. 1, pp. 12–20, Mar. 2021. doi: 10.26706/ijaefea.1.8.20210302.

[11] K. S. Rambhad, J. Dane, V. Joshi, S. Kulkarni, and R. Ghodke, “Simulation and Optimization of Silica Gel and MolecularSieve Desiccant Wheel for Air Dehumidification,” Journal of Thermal Engineering and Technology, vol. 5, no. 1, pp. 11–27, May 2020. doi: 10.13140/RG.2.2.23423.23205.

[12] B. K. Pradhan, D. Wangmo, J. Dendup, K. Yeshi, K. Drukpa, and T. Wangdi, “Design and fabrication of Portable manual Roller Bending machine,” JNEC Thruel Rig Sar Toed, vol. 6, no. 1, 2023.

[13] A. Kale, S. Patil, R. Shinde, and P. Jadhav, “Design and manufacturing of automatic transmission system,” International Research Journal of Engineering and Technology (IRJET), vol. 7, no. 3, pp. 3657–3661, 2020.